TD Cold Air Intake 998 turbo Sidewinder SRX Thundercat zr9000 2017 to 2019

Nice item to go towards my upcoming tune. Cleans up under the hood nicely. Mine looks.like the top ad photo one, has the oval cone shaped k&n filter and water proof baggie. Test fit without the rubber joiner amd u will get a better idea of how it needs to be placed to just clear things. You will end up sliding the rubber onto the plastic intake tube alot. Then the metal elbow will need to be placed right up against the plastic and this just allows u to clear the area where the cab twist lock bolt rest. If the filter is not right right to the intake, I found it appears to be a poor design and fit. Just takes some time to place things. Now mine just stays away from the side/belly pan and the filters flat area is right in the flow of air. Can't hear any different turbo sounds blipping it in the garage on the stand. Also, don't connect the small airline coming from the pressure relive sensor, now recommended to hang down below the sensor. Mine was full of oil prior to deleting the roll over valve. Can also freeze up with moisture and will throw codes if this happens and ultimately ruin a perfectly good ride. I placed a short piece of blocked hose over that small nipple towards the filter side of the elbow. Ita a long review but you can thank me later, haha

Install was about 5 mins, super easy to do! Can hear the turbo all day now :D

Fits great, 10 minute job and increase the turbo sound, no regrets

Just like any other products ... or fit perfectly and easy installation.

Delivered as promised very nice I have not had much time to test it. Having said that if I could offer some positive feedback the only thing I could say that could be improved is the fit, I did modify the aluminum so that it mounted on a slight angle as it was causing too much pressure on the filter. I am very pleased and I recommend turbo dynamics to everyone