Description
PROCROSS TRACK DRIVESHAFT DURABILITY KIT
(Fits all Procross Based Sleds 2012 - Present)
This kit utilizes a Billet Aluminum Bracket with a high quality SKF bearing that adds a second bearing to help support the torque forces applied to the brake side of the sled to give maximum life to the track drive with minimum maintenance.
This billet bracket also stiffens the tunnel to keep flexing to a minimum. The kit adds the ability to keep the shaft greased for both the inside bearing and outside (brake caliper) bearing.
As with all Hi-Tech parts, this kit was extensively tested with perfect results.
Related Products
Related Products
Twister Torsional conversion Kit 2012-2015 procross
425.00$ CAD
Twister Torsional conversion Kit 2012-2015 procross
Comes with a 46/36 helix (custom available on demand)
STM Procross Torsional secondary conversion
STM
299.99$ CAD
Product Description
2012-13 Arctic Cat Torsion spring cap option that is used with the STM billet helix's. Allows the use of the Arctic Cat torsion spring and has holes for spring load...
TD Procross 2.5" Highflow Turbo Outlet for 2012-2016 procross 1100 turbo F/XF/ZR9000
Turbo Dynamics
399.99$ CAD - 457.89$ CAD
Turbo Dynamics highflow stainless steel turbo outlet 2.5"
Straightens and increases flow out of the turbocharger producing less HP loss than the stock restrictive turbo outlet.
This...
Billet Track Adjusters by Grip N Rip
59.99$ CAD
Billet Track adjusters by Grip N Rip
These replace the very weak factory adjusters that can crack when applying strong track tension.Strong track tension is needed when running studs, especially...
Hi-Tech -1100T Waste Gate Lock Z1 or Procross
Hi-Tech
179.00$ CAD
1100T Waste Gate Lock Z1 or Procross